Fire Protection
Fire Doors and Frames
Fire Doors, Frames & other Passive Fire Protection
Survival Solutions Can provide a range of fire door solutions to meet the requirements of the Building Code of Australia, AS 1905.1 2005 & AS 1851.
The design, installation and certification of fire doors must be carried out by suitably qualified technicians, however regular inspections can be carried out by building occupiers, thus reducing on inspection cost.
Survival Solutions advocates an annual inspection resume for fire doors in occupied units to coincide with the issue of AFSS to councils. As everyone knows it can be a difficult process to gather all building occupants at the same time to carry out inspection and we believe more sustainable to check doors once per annum.
This rule does not apply to doors in common area where high traffic and damage can occur with anyone noticing. In this circumstance we offer a bi annual inspection.
The general purpose of passive fire protection systems and fire doors are a cost effective approach to limit the spread of fire and smoke within a building or facility. The purpose of passive fire protection including fire doors in buildings is to assist in the fire separation of fire compartments, with the primary objective to protect occupants in the event of evacuation, followed by minimising the spread of fire from one compartment to another and therefore reducing building damage.
Passive systems including fire doors and frames are used whenever an opening is required through a fire wall, floor or ceiling for services such as pipes, ducts, cables, inspection panels, light, observation or human entry. In these situations, the service must be sealed in such a manner that the fire resistance level or rating of the element of construction is maintained. Passive products and systems are used to close off gaps in floors and walls between services, around cables and pipes, around ducts and in control joints.
Survival Solutions provides a comprehensive range of fire doors and passive systems, supported by design and maintenance services to suit the following applications:
- Fire Protection Systems
- Structural Steel Protection
- Penetration Seals
- Fire Rated Access Hatches
- Concrete/Masonry & Metal Decking
- Ventilation Ducts
- Cable Ducts / E&M Services
- Fire Rated Window, Doors, Frames and associated hardware
- Intumescent Fire Dampers
- Fire Rated Partitions and Ceilings
- Fire Rated External Walls
- Fire Resistant Timber and Fabric Products
- Fire Shutters
- Sliding Fire Doors
For information contact Survival Solutions Phone 1300 040 362 or email enquiries@survivalsolutions.com.au
“Our experience and qualifications are your guarantee of quality.”
